034Motorsport Dual Pulley Performance Pack 190mm - Audi B8 S4/S5/Q5/SQ5 - Audi C7 A6/A7 - D4 A8 3.0 TFSI

Description Looking to maximize the performance of the Supercharged 3.0T Audi S4/S5/SQ5? Look no further. Get up to 540HP and 491FT-LBS of torque with the 034Motorsport Dual Pulley Performance Package! Included is everything needed to go from stock, to a Stage 2+ tuned, dual pulley upgraded beast! Note:If you have a DSG transmission, be sure to check the TCU Tune checkbox below. Do NOT check the TCU Tune checkbox if you have a ZF8 automatic or 6-spd manual transmission. Assembled in this kit is every piece of hardware and software needed to upgrade any Audi B8 S4/S5/SQ5, C7 A6/A7, and D4 A8 equipped with the 3.0 TFSI Supercharged V6 to 034Motorsport Stage 2+ tuning! The hardware and software in this kit will completely transform your 3.0T Supercharged Audi inot a high-performance powerhouse, capable of thrashing any road course, drag strip, or commute 034Motorsport Dynamic+ 3.0 TFSI Performance Software is flashed via the factory OBD-II port, and does not require any physical modification of the factory ECU. Stage 2+ is available in 91 Octane, 93 Octane, 100 Octane, 104, and E40 Octane files. *Note: In order to achieve the max power potential of this kit, we recommend running an Upgraded Heat Exchanger to prevent heat soak, and an upgraded High-Pressure Fuel Pump to run the E40 fueling files. See “Related Products” for more info. WHAT’S INCLUDED: 034Motorsport Dynamic+ Stage 2+ ECU Tuning 91, 93, 104, and E40 fuels Advanced Launch Control Features Included 034Motorsport Dynamic+ DL501 DSG Transmission Tuning Multi-Step Launch Control Based on Pedal Position (when not using Advanced Launch Control) Click Check Box to Include in Performance Pack Not For Use With 6-Spd Manual Transmissions 034Motorsport Dynamic+ End User Flashing Kit 034Motorsport Supercharger Pulley Upgrade 034Motorsport 190mm Billet Crank Pulley Upgrade Bando Rib-Ace PK1320 Pulley Belt Installation Hardware STAGE 2+ ECU TUNING: 034Motorsport Dynamic+ Stage 2+ Performance Software for the Audi B8 S4/S5/Q5/SQ5, C7 A6/A7, and D4 A8 3.0 TFSI is engineered to further increase horsepower and torque output over Stage 2 levels with the addition of 034Motorsport’s 190mm Lower Pulley in addition to our upper pulley. The Supercharger Pulley Upgrade allows for increased boost pressure from the factory Eaton TVS1320 Supercharger throughout the powerband, while 034Motorsport’s proprietary calibrations safely yield additional power from the 3.0 TFSI engine Stage 2+ Performance Software features a higher redline of 7,400 RPM, resulting in a broader powerband and greater peak horsepower figures than available with the factory 6,400-7,000 RPM maximum engine speed (Stock RPM limit is dependent on B8 or B8.5 generation). In addition to power improvements, 034Motorsport’s engineers spent a significant amount of time refining the throttle mapping in both Dynamic and Comfort modes to provide improved throttle response and allow for more precise throttle modulation. Stage 2+ Performance Software also enables left-foot braking, which allows for further control of the vehicle when driving on track. Increased Horsepower & Torque Throughout the Powerband Improved Power Delivery, Acceleration, and Driving Characteristics Available in 91 Octane, 93 Octane, and 100 Octane Calibrations Refined Throttle Mapping for EnhancedThrottle Response & Precision Raised RPM Limit to 7,200 for Broader Powerband Speed Limiter Removed for Increased Top Speed Track-Tested Calibrations Ensure Consistent Power Delivery Flashed Directly Via the Factory OBD-II Port Select Dyno Chart: – Stage 2+ (Dual Pulley) – E40 Crank HP & TQ E40 Crank HP & TQ Gains E40 – Wheel HP & TQ ADVANCED LAUNCH CONTROL: Once again, 034Motorsport has pushed the boundaries of what is possible for the 3.0T Supercharged engines found in many Audi’s through our Dynamic+ tuning! After extensive development and refinement by our world-class tuning team, all existing and future 034Motorsport tuning customers will have access to all-new Advanced Launch Control programs. These features allow you to customize your desired launch RPM on the fly via your cruise control stalk, and run the intercooler pumps and engine fans at full speed below 10kph to allow for full cooling during staging prior to drag racing. This provides a large advantage over factory launching protocols as it results in the coolest possible IATs, and allows the driver to adjust their launch settings to be the most optimal for their conditions. DSG SOFTWARE UPGRADE: Flashed directly through your vehicle’s OBD-II port, 034Motorsport’s proprietary calibrations for the DL501 TCU safely and effectively raise the factory transmission’s RPM limiter, increasing the available powerband and allowing your car to make use of Stage 1/2 Performance Software.